Description

1 LOTS = 5 TUBES 6N3P-E Radio tube 6N3P double triode - designed to amplify the voltage and generate low-frequency oscillations. It is used in receivers operating in the ultrashort wave range as a high-frequency grounded-grid amplifier, as well as a mixer and local oscillator. Can be used in low power VHF receivers, pulse circuits and low frequency pre-amplification stages. 6N3P radio tube of increased durability, reliability and mechanical strength. Cathode indirect incandescent oxide. Works in any position. Produced in a glass finger design. Item specifics: Filament voltage 6.3 ± 0.6 V Heating current 350 ± 30 mA Anode voltage nominal (constant) 150 V Anode voltage limit (constant) 300 V Anode current of each triode 8.5 ± 3.5 mA The cathode current of each triode limit 18 mA Grid voltage nominal (constant) -2 V Reverse grid current of each triode is not more than 0.1 μA Power dissipated by each anode, the maximum 1.8 W Limit (constant) voltage between cathode and heater: - at negative potential of the heater 150 V - with a positive potential of the heater 100 V The steepness of the characteristics of each triode is 5.9 ± 1.9 mA The gain of each triode is 36 ± 8 Input resistance at 60 MHz 14 kΩ Output impedance at 60 MHz 19 kΩ Shipment ========= Sending parcels with a track number worldwide by airmail Estimate delivery time is 10-20 working days.